THE SHOP, INC
Please direct all questions to mail@theshop-inc.com
Honing disc diameter 14"
Honing area width 3 1/4"
Honing disc thickness .975"
Drive plate diameter 6"
Drive plate run-out .0005"
Honing disc vertical run-out at 7" radius .002" maximum
Honing disc area 110 square inches
Surface speed Outer diameter : 6322 Inner diameter : 3364 Average
: 4843 SFM (Surface feet per minute)
Speed 1725 rpm.
Motor 1/2 hp. 120/230v ac. Totally enclosed, sealed ball bearing.
Capacitor start.
Power requirements Start up: 34 to 37 amp draw for 2 seconds.
Run: 7.5 amps
Machine dimensions Manual: 18" diameter, 14 1/2" tall,
plus lid clasps. Automatic: 30" x 30" by 26" tall when arms
are raised.
Height of honing surface 13" from base.
Weight Manual: 50 lbs. with out disc mounted. Automatic: 70
lbs. with out disc mounted. Disc: 15 lbs.
Housing 18 gauge steel
Finish powder coat
Grinding rate .0005" in 10 seconds using 240 grit with
3/4 lb. down pressure on a #10 comb blade.