New
disc: Two sided, exclusive surface finish, dynamically balanced, seasoned
and blade tested, ready for immediate use. The only tested disc on the market.
Reference Rings: All machining and balancing locates to these surfaces. Ensures a maximum .002" vertical run out at outer edge of 14" disc for smooth grinding with no skipping or chatter. Accurately relocates each time disc is taken on and off machine and/or when disc is resurfaced. Easy disc removal - one screw.
14"-16" / $475.00 / 20 lbs.
18" / $525.00 / 25 lbs.
14" - one-sided/$325
THE SHOP INC. manufactures and resurfaces clipper honing plates for all 14" and 16" manual clipper sharpening machines. The discs feature a surface more accurate than is currently available. We have developed a scraping process to finish clipper honing discs to ensure a near perfectly true plane of the disc surface which is not possible by the normal lathing practice alone. Read more about The Shop, Inc.'s honing plates...
Refinish disc: Lathe cut, precision scrape, season, blade test two surfaces. Dynamically re-balance. Maximum .005" removed per side.
14"-16"-18" / $250.00 / 20 lbs.
One surface/$125
Convert your disc to shop format: ADD $50
Blade magnet: Ergonomically shaped with
index finger relief for applying pressure towards blade tip and angled to aid
in proper 'set down' of blades on disc.
Small/$30.00
Large/$45.00
Test Plate/Rubbing Block: Precision ground
alloyed cast iron. Accurate reference for revealing tooth contact pattern quickly
and easily. The only way to determine that blades are being ground properly
and/or if disc needs resurfacing. Guarantees you don't send out any marginal
or bad blades. Essential tool for learning how to sharpen blades manually. Ground
to within .00005". 6" diameter x 3/4" thick. Surfaced on one side.
$125.00
Light - Mounts on side of machine. Has
flexible neck and swivel base in order to easily locate illumination to your
preference.
$48.00
Manual
Machine System Includes:
Our most popular system. Includes all items listed in the link below. Experience
the unequaled accuracy of our precision scraped, two sided, dynamically balanced
honing disc combined with the unique features of our proven system for fast
and precise sharpening. The dust control lid makes this the cleanest machine
to operate. Our quick and easy recharging procedure lets you spend more time
sharpening, increasing your productivity. Dust control blower/filter optional
(add $220.00). Easily upgraded to our automatic model at any time. ($2,900 with dust blower/filter)
14" / $1825.00 / 75 lbs.
Oil applicator: Applies an even film of oil to disc surface.
Handle is oil reservoir. Oil wicks out pads for consistent application with
no mist as with a spraying technique. Mounts conveniently on side of machine.
$30.00
Replacement pads for applicator/$3.00
Grit Spreader: Motorized unit distributes
grit in a thin and even coating with minimal waste onto disc surface. No rubbing
is needed for even distribution.
$125.00
Dust collection blower/filter : Quiet blower creates negative air pressure in lid opening, minimizing airborne dust.
$220.00
Magnifying lens : Mounts on light. 2X4 power.$40.00
Blade/socket tool : Special gauged end for crimping socket ears and tapered end for aid in lessening spring pressure and replacing cutters without damaging sharpened edges. .$25.00
Test string : 20' of flat braided cotton string to test sharpness of individual teeth. $5.00
Test fur: 1/3 yard (1' X 54") long, 1.5" faux fur is dense and fine for a consistent and stringent test of all blades. $14.00
Grit:
180 - 240 - 320 aluminum oxide grit sizes. (Pictured with honing oil)
2 lbs - $15.00
Honing Oil: 16 oz. bottle of petroleum
based honing oil. (Pictured above)
$5.00
Brass deburring brush : Used after sharpening to break burr loose.
$18.00
Demagnetizer: Helps release filings and debris from blades for a more thorough cleaning.
$90.00
Abrasive pads : Mount on bench grinder for reshaping comb teeth so blade enters fur better.
$5.00
Video or DVD : Promotional of our sharpening system. Refunded towards first purchase.
$15.00