Both the automatic and manual systems are complete with everything you will need to sharpen clipper blades with guaranteed results.
The following list is of all the included and optional items. Click on each item's headline below for detailed information and more pictures.
Aluminum honing disc: two sided, precision scraped, dynamically balanced,
seasoned, and blade tested. The only tested disc on the market.
Please read information on our discs.
Reference rings: All machining and balancing locates to
these surfaces. Ensures a maximum .002" vertical run out at outer edge
of 14" disc for smooth grinding with no skipping or chatter. Accurately
relocates disc each time it is taken on and off machine and/or when disc is
resurfaced.
Easy disc removal: One screw.
Dust control lid: Contains dust and mess very effectively. Easily removed to change disc or clean out debris.
Dust collection part:Connect the dust port to your shop's
dust collection system or add optional blower / filter unit for practically
dust free operation. ($220 extra with the manual system, included with automatic
system)
External brake: Easily slow down disc to recharge or bring to a complete stop safely.
Momentary switch: Control recharging speed.
Built in lifting handles: Openings also allow cooling air to reach motor.
Grit spreader: Motorized unit distributes grit evenly onto disc surface
with minimal waste. No rubbing is needed for even distribution. Short ( 45 second
) procedure to recharge disc with oil and grit.
Oil applicator: Applies an even film of oil to disc surface. Handle
is oil reservoir. Oil wicks out pads for consistent application with no mist
as with a spraying technique. Mounts conveniently on side of machine.
Magnet: Ergonomically shaped with index finger relief for applying pressure
towards blade tip and angled to aid in proper 'set down' of blades on disc.
Blade/Socket tool: Set sockets to proper width with gauge end. Has tapered
end for removing and installing cutter without
damaging sharpened blade.
Light: Mounts on side of machine. Has flexible neck and swivel base.
Easily locate illumination to your preference.
Test plate / Rubbing block: Precision ground alloyed cast iron. Accurate
reference for revealing tooth contact pattern quickly and easily. The only way
to determine that blades are being ground properly and/or if disc needs resurfacing.
Guarantees you don't send out any marginal or bad blades. Essential tool for
learning how to sharpen blades manually. Ground to within .00001". 6"
diameter x 3/4" thick. Surfaced on one side.
Test string: Used to test blade sharpness.
Test fur: Dense and fine for a stringent test of blade sharpness and
spring tension.
Oil: 16 oz. bottle of petroleum based honing oil.
Grit: 2 lb. of 240 grit.
Questions: Call 800-442-6144 or E-mail mail@theshop-inc.com
Back to TOP